ALKALINE WHEEL CLEANER,5L

APPROVALS/REGISTRATIONS:

Product registered at the National Institute of Toxicology.

PROPERTIES:

Water-soluble solvent degreaser of high concentration. Concentrated ionic solvent, free from organic solvents. Reduces surface tension, facilitating penetration of the cleaning solution into hard-to-reach places. Miscible in water in all proportions. Non-flammable. Non-emulsifiable.

TECHNICAL CHARACTERISTICS:

Free of AOX (Adsorbable Organic Halides). Does not contain silicones. Biodegradable.

APPLICATIONS:

For quick cleaning of all types of vehicle wheels, including polished aluminum.

HOW TO USE:

Spray the product pure or diluted in 10 parts water (both cold and hot) onto the surface to be cleaned. Let it act for at least 2 or 3 minutes and rinse with high-pressure water. In cases of extreme dirt, use a brush or sponge.

Depending on the dirt, the following dilutions are recommended: Extreme dirt: 1:5 Medium dirt: 1:20 Maintenance: 1:50

RECOMMENDATIONS:

The use of hot water significantly improves results. Better results are achieved with time, heat, and scrubbing. For cleaning stainless steel wheels, it is best to use our QUEMDIZ/ACID WHEEL CLEANER. IMPORTANT: QUEMDIZ products are guaranteed against manufacturing defects. The information, recommendations, specifications, usage methods, and dosages in this document are considered correct and based on data obtained from our own research. However, they may not be the most suitable for every customer, but rather general guidelines. It is always recommended to conduct preliminary tests for each specific application.mFurthermore, since QUEMDIZ does not have direct or continuous control over how and where its products are applied, it cannot accept direct or indirect responsibilities arising from their use unless the recommendations and specifications provided by QUEMDIZ have been followed. This document is subject to change without prior notice.