Industrial Helmet IRIS 2 white. With Ventilation. Integrated goggles

Features

The IRIS 2 consists of:

• a pressure-molded A.B.S. cap:

- with adjustable BTP-type ventilation

- without ventilation EBT-type

• a harness comprising:

- a braided fabric cradle

- a headband with a nape strap with closure tape, made of low-density polyethylene, removable and adjustable from 49 to 63 cm, equipped with a 32 cm comfort band

Weight: helmet 360 g - goggles 60 g

The manufacturing date, expiration date, and batch number are engraved under the helmet visor.

Service life: 48 months

Helmet colors with ventilation holes: white, yellow, orange, green, blue, and red.

Helmet without ventilation holes: white.

For other colors, please contact us

BADGE HOLDER Version

Helmet equipped with a transparent polycarbonate badge holder (usable format: 85 x 54 mm).

WORK AT HEIGHT OPERATOR Version

Helmet equipped with a 4-point chinstrap (quick-click closure).

Certifications and tests

The protective helmet meets the requirements of the NF EN 397+A1: 2013 standard, as well as the following optional requirements:

• resistance to very low temperatures, -30 °C

• electrical insulation in the non-ventilated model (EBT), symbol 440V~

• Lateral deformation: symbol LD

The protective helmet meets the requirements of the NF EN 50365: 2002 standard:

• dielectric test at 5000 V and dielectric strength test at 10,000 V on the non-ventilated model (EBT), double triangle symbol - class 0

The protective helmet meets the requirements of the PREN 50365; the corresponding tests are indicated below:

• dielectric test at 20,000 V and dielectric strength test at 30,000 V on the non-ventilated model (EBT).

The integrated protective goggles meet the requirements of the NF EN 166: 2002 standard, whose main tests are indicated below:

• optical powers of the eye protectors, optical class 1

• colorless goggles: transmission factor, ultraviolet protection filter: step number 2-1.2, according to NF EN 170: 2003

• dark goggles: transmission factor, solar protection filter for industrial use: step number 5-3.1, according to NF EN 172/A2: 2001, very dark filter

• protection against high-speed particles (low-energy impact: 45 m/s), symbol F.

Accessories

Kit of 6 high-visibility stickers, noise reduction devices, mesh face shields, polycarbonate or acetate face shields, lamp holders and cable guides, headlamps, 12 mm and 20 mm cotton or leather chinstraps, 4-point chinstrap, hygienic cradle, cold weather cap, engraved identification label.

Marking

The helmet allows front marking (110 x 40 mm), lateral marking (70 x 20 mm), or rear marking (50 x 35 mm) by hot stamping or engraving of initials or company name.