Dielectric cleaner for motors and electrical panels, 5L

APPROVALS/REGISTRATIONS: Product registered in the National Institute of Toxicology. PROPERTIES: High cold dissolution capacity. Dissolves completely and faster than petroleum-based solvents. Dries quickly without leaving oily residues that could interfere with electric current. Non-flammable. Contains solvents which, among chlorinated ones, present a low toxicity index. Can be used safely on common metals including aluminium, as it is non-corrosive. COPPER METAL CORROSION TESTS: Does not attack any metal when dry. However, if wet, its intrinsic corrosive power increases. Tests carried out on: galvanised steel, aluminium, magnesium, stainless steel, tin, and other metals and alloys with humidity up to 50 ppm have yielded a penetration index so low that in one year it would be 0.5 mm. INSULATOR TESTS: No harmful effects on acrylic or polyvinyl coatings. It solubilises certain insulating varnishes but there will be no risk if dried with air within a maximum of 3 minutes after cleaning. PLASTIC TEST: Neither by contact nor by immersion does it attack the following materials: bakelite (phenol-formaldehyde), acrylic resins (plexiglass), nylon, alcohol, polyvinyl, nitrocellulose, teflon. TECHNICAL CHARACTERISTICS: Industrial solvent for dry degreasing operations. Cleaning of electrical equipment, electronics, electric motors, general parts. High volatility.