Product formulated for chlorination by slow dissolution of pool water. Additive with algicide flocculant for complete treatment.
100% secure payment. Your purchases protected with SSL and trusted methods Visa, MasterCard, PayPal
We deliver to mainland Spain, Balearic & Canary Islands, Portugal and other countries.
Exchange or refund guaranteed according to legal standards and for defective products.
APPROVALS/REGISTRATIONS:
Product registered at the National Toxicology Institute.
PROPERTIES:
Triple action complex 200 g (90% trichloroisocyanuric acid, flocculant, and algaecide).
TECHNICAL CHARACTERISTICS:
Once placed in the recirculating water flow, it gradually releases a useful amount of chlorine into the water. These are slow-dissolving tablets typically placed in the pool skimmer during purification. They also provide a sufficient amount of algaecide and flocculant in solution to keep your pool water clear and clean. Three effects in one product and easy to apply.
APPLICATIONS:
For slow dissolution chlorination of pool water.
INSTRUCTIONS FOR USE:
Although the dosage depends on various factors such as weather conditions, number of bathers, solar radiation, etc., we can provide the following indicative dose: 2 – 3 g of KD TRIPLE per day per m3.
TREATMENT: Adjust the water pH to between 7.2-7.6 and proceed to place the tablets in the skimmers and connect the purifier.
DOSAGE: For a pool of approximately 100 m3, you would use a little over one 200 g tablet per day. Periodically check the chlorine content in the pool water and maintain it between 0.6 - 1 ppm, and the pH value between 7.2-7.6.
SHOCK TREATMENT: At the start of treatment or when the chlorine level has significantly dropped, a shock superchlorination can be performed by adding 5 g per m3 of water, leaving the purifier running for at least 24 hours. Dilute the required amount in a bucket and distribute it throughout the pool.
RECOMMENDATIONS:
Always maintain a sufficient purification time for the pump to circulate all the water in the pool basin, typically estimated to be a minimum of 6 - 8 hours. IMPORTANT: products supplied by Lubricalia are guaranteed against manufacturing defects. The information, recommendations, methods of use and dosages given in this data sheet are indicative and refer to general use: they do not replace the product's safety data sheet, which is supplied with the goods and must be consulted before handling. As application conditions vary from case to case, we always recommend testing on a small, inconspicuous area first. This document may be updated without prior notice.
You might also like