CASTROL Aircol CM 68, 208L

Description Castrol Aircol™ CM are high-quality compressor oils based on highly refined mineral oil, enhanced with additive technology, offering excellent thermal and oxidation stability, and good load-carrying capacity compared to other products in the same class. Application Aircol CM oils, formulated without zinc (ashless oils), are recommended for the lubrication of reciprocating and screw compressors. Aircol CM is classified: ISO 6743-3 Compressor Oils DAA and DAB for drip-fed reciprocating and rotary air compressors DAG and DAH for oil-flooded rotary air compressors. Aircol CM compressor oils have a low tendency to form carbonaceous deposits and meet the requirements of DIN 51506 VDL for reciprocating compressors with discharge temperatures up to 220°C. For flooded and screw compressors operating continuously with temperatures above 90°C. The product is designed to offer drain intervals of up to 4000 hours. For intermittent or continuous temperatures above 90°C, the change intervals established by the manufacturer must be respected. Its high FZG load-carrying capacity is designed for compressors with gears. Viscosity selection should be based on manufacturer recommendations. However, as a general guide, Aircol CM 32 and 46 are suitable for rotary compressors, and where Aircol CM 68, CM 100 and 150 p