Immersion decarbonizing degreaser, case 4 x 5L

Sale format: full box of 4 x 5-litre units. The price is for the full box (20 litres total).

CERTIFICATIONS/REGISTRATIONS: Product registered with the National Toxicology Institute. PROPERTIES: Controlled foam. Decreases surface tension with electrostatic exchange effect, facilitating penetration of the cleaning solution into pores and inaccessible places, effectively removing dirt without scratching or leaving any film. Totally fireproof. Non-flammable. Biodegradable. Not emulsifiable. TECHNICAL CHARACTERISTICS: Powerful degreasing and rust removing supercleaner with a repulsion effect, acidic in nature. Contains no organic solvents, formulated with a special combination of balanced surfactants, penetrating agents, and corrosion inhibitors that remove grease, rust stains, and environmental pollution practically without scrubbing, simply by applying sufficient water pressure during rinsing. Red: color Characteristic: odor pH: 2 Density: 1.2 Contains: mineral acids Contains: corrosion inhibitors Contains: solvents and emulsifying agents No: flash point APPLICATIONS: Cleaning surfaces exposed to environmental pollution such as natural stone, granite, etc.For cleaning tiles with grease and washings, as well as mechanical workshops, road tunnels, underpasses, traffic signs, etc., where there is old dirt, encrustations, or grease that common detergents cannot remove, using a pressure washer. HOW TO USE: It is recommended to use undiluted or diluted with any tool that can evenly spread the product on the surface to be cleaned (brush, scrubber). Avoid spraying to eliminate the risk of accidental splashes. No scrubbing is necessary. Rinse thoroughly with water at the end of the cleaning operation with a pressure washer.

With this application, scrubbing is unnecessary as the pressure itself can completely remove any potential adhesion. If there is insufficient water pressure, rinse thoroughly, and sometimes a second application may be necessary. Although we recommend using our EXTRALIMP. The product's dilution will depend on the type and age of the dirt and the surface it is adhered to (from 50% to 10 parts water). For old and abundant grease, use undiluted. USE WITH CAUTION. RECOMMENDATIONS: Its cleaning action is significantly enhanced with longer contact time, using hot water for subsequent rinsing. Always use where water can be applied. In its pure state, it can damage certain types of paint or material, so it is advisable to perform a test in a small area before use. IMPORTANT: products supplied by Lubricalia are guaranteed against manufacturing defects. The information, recommendations, methods of use and dosages given in this data sheet are indicative and refer to general use: they do not replace the product's safety data sheet, which is supplied with the goods and must be consulted before handling. As application conditions vary from case to case, we always recommend testing on a small, inconspicuous area first. This document may be updated without prior notice.