Eco-friendly Paint remover, case 4 x 5L

Sale format: full box of 4 x 5-litre units. The price is for the full box (20 litres total).

APPROVALS/REGISTRATIONS:

Product registered at the National Institute of Toxicology.

PROPERTIES:

Paint remover for varnishes, paints, and marker ink on smooth water-soluble surfaces. Removes varnishes from different substrates. Not suitable for certain two-component varnishes and special primers. Non-flammable. Non-emulsifiable. Can be diluted with water. Eco-friendly product.

TECHNICAL CHARACTERISTICS:

Formulated with active organic ingredients, enriched with degreasing emulsifiers, glycols, and additives to activate the stripping process of various varnishes, including corrosion inhibitors to protect the base surface. Free from methylene chloride, toluene, and alcohols. Free from chlorinated solvents.

APPLICATIONS:

Removal of varnishes, inks, and some paints on different substrates such as wood, plastic, metal, sheet metal, stainless steel, glass, marble, polished granite, etc.

INSTRUCTIONS FOR USE:

On dry surfaces, apply the product generously and let it sit for a few minutes. Scrub if necessary. The duration of action and number of applications depend on factors such as the age of the layer, its thickness, type of varnish, paint or ink, substrate porosity, etc. After the exposure time, remove the product with a cloth, sponge, or brush, and repeat the operation several times if necessary. Finally, rinse thoroughly with pressurized water and with our ECO 50-50-FLORAL detergent to remove residues.

RECOMMENDATIONS:

Available in two versions: LIQUID (for horizontal applications and/or immersion) and GEL (for inclined and/or vertical applications to prevent dripping and ensure optimal contact time). IMPORTANT: products supplied by Lubricalia are guaranteed against manufacturing defects. The information, recommendations, methods of use and dosages given in this data sheet are indicative and refer to general use: they do not replace the product's safety data sheet, which is supplied with the goods and must be consulted before handling. As application conditions vary from case to case, we always recommend testing on a small, inconspicuous area first. This document may be updated without prior notice.