QUICKTAP High Performance Threading Fluid 60ml

Advantages

• Exceptional thermal and chemical stability means improved threading performance

• Contains high-performance extreme pressure additives that facilitate optimal metal flow through the cutting zone

• Does not contain any chlorinated solvents in compliance with regulation 40 CFR Section 261, Subsection D

Operations

• Threading
• Tap threading
• Cutting oil additive enhancer

Recommended Dilutions

When used pure, QUICKTAP threading fluid should be applied directly to the tool/workpiece interface with a nozzle bottle or other applicator. When used as an additive with pure cutting oils, QUICKTAP should be poured into a high-agitation area or pre-mixed with the cutting oil before adding to the sump.

Add approximately 1 liter of QUICKTAP threading fluid for every 10 liters of conventional cutting oil. It is recommended to check the compatibility of QUICKTAP with the cutting oil before adding it to the sump.

This product is not water-soluble and should not be mixed with water-soluble oils or synthetic coolants.

Commercial Presentation

QUICKTAP is supplied in IBC containers, drums, pails, and squeeze bottles.

Physical Properties

VISCOSITY, cSt @40°C ---- 520

FLASH POINT -------- 218 °C

APPEARANCE --------------- Clear amber

ODOR ------------------- Moderate

DENSITY ------------------- 0.94 g/cm3

Chemical Properties

Chlorine -------------- Yes

Sulfur --------------- Yes

Active Sulfur ------- No

QUICKTAP does not contain animal by-products or heavy metals.