Waterproofing of facades, case 4 x 5L

Sale format: full box of 4 x 5-litre units. The price is for the full box (20 litres total).

PROPERTIES:

Reduces surface tension, facilitating the product's penetration into pores and the most inaccessible areas of the substrate, while being permeable to water vapor diffusion and non-adherent. This ensures that the substrate retains its natural characteristics and appearance. The surfactants it contains are BIODEGRADABLE. It is colorless, resistant to ULTRAVIOLET rays from the sun, and resistant to alkalis. It provides significant reduction in water absorption, protecting against moisture, rain, and efflorescence of soluble salts. It is flammable and non-emulsifiable.

TECHNICAL CHARACTERISTICS:

Formulated from stable and balanced mixtures of different OLIGOMERIC ORGANOSILOXANE in organic solvents.Suitable for dry water-repellent treatment of all types of construction materials: concrete, fiber cement, terracotta, plaster, stone, granite, exposed brick, siliceous-calcareous brick, etc.

• Color: Colorless
• Odor: Characteristic
• pH: Neutral
• Density: 0.9
• Total polymerization: After 7 days of application
• Corrosion inhibitor: Contains
• Solvents, surfactants, and emulsifying agents: Contains
• Antifreeze agents: Contains

APPLICATIONS:

For treatment of facades and exterior walls made of concrete, plaster, brick, stone, and other construction materials.

METHOD OF USE:

The surface to be treated must be clean and completely dry. Use the product pure as supplied, applying it by spraying, with a roller, brush, rubbing, immersion, or hosing. It is crucial to apply only the amount of product that the material can absorb to avoid wasting it. The surface must be sufficiently soaked. The coverage will depend on the porosity of the substrate, but generally, on a standard exposed brick surface, the approximate coverage is 3-4 m²/L.

RECOMMENDATIONS:

In some cases, the facade color may become more intense after treatment. It is advisable to perform a preliminary test to observe the final result. Apply the product at temperatures between 10-25ºC, avoiding direct sunlight. It is important to apply only the amount of product that the material can absorb to avoid wasting it. The surface must be sufficiently soaked.

IMPORTANT: products supplied by Lubricalia are guaranteed against manufacturing defects. The information, recommendations, methods of use and dosages given in this data sheet are indicative and refer to general use: they do not replace the product's safety data sheet, which is supplied with the goods and must be consulted before handling. As application conditions vary from case to case, we always recommend testing on a small, inconspicuous area first. This document may be updated without prior notice.