QUICKTAP High Performance Threading Fluid 60ml

Advantages • Exceptional thermal and chemical stability means improved threading performance • Contains high-performance extreme pressure additives that facilitate optimal metal flow through the cutting zone • Contains no chlorinated solvents in compliance with 40 CFR Section 261, Subsection D Operations Tapping Threading Additive to favour pure cutting oils Recommended Dilutions When used neat, the QUICKTAP threading fluid must be applied directly to the tool/workpiece interface with a squeeze bottle or other applicator. When used as an additive with pure cutting oils, the QUICKTAP threading fluid must be poured into an area of high agitation or pre-mixed with the cutting oil before adding to the sump. Add approximately one litre of QUICKTAP threading fluid to every ten litres of conventional cutting oil. It is recommended to verify the compatibility of QUICKTAP with the cutting oil before adding it to the sump. This product is not water-soluble and must not be mixed with water-soluble oils or synthetic coolants. Commercial Presentation QUICKTAP is supplied in IBC containers, drums, pails, and squeeze packs. PHYSICAL PROPERTIES VISCOSITY, cSt @40°C ---- 520 FLASH POINT -------- 218 °C APPEARANCE ---------------------- Clean, light amber ODOUR ------------------------- Moderate DENSITY ------------------- 0.94 g/cm³ CHEMICAL PROPERTIES C