XTREME GRIND 321C, 20L

XTREME GRIND 321C is a fully synthetic cutting fluid designed for use with ferrous metals.

XTREME GRIND 321C does not contain petroleum-derived oils, making it an environmentally friendly product. This oil-repellent fluid provides excellent corrosion protection for parts and machine tools during the machining process.

XTREME GRIND 321C remains exceptionally clean, has excellent bio-resistance, and generates virtually no foam. The product has been formulated with environmentally friendly surfactants, selected to promote rapid particle settling, offer good washing properties, reduce cycle times, and improve the settling ratio.

XTREME GRIND 321C can also be used in low-demand machining operations.

Typical characteristics 

Appearance of concentrate........................................................................Yellowish fluid* 

Appearance of diluted fluid.......................................................................Fluid ranging from transparent to slightly opaque 

Density ...........................................................................................1.04 g/cm3 

pH of 5% solution.......................................................................9.1-9.5 

Chlorine, diethanolamine, formaldehyde-releasing biocides,  

mercury compounds, nitrites, phenols, phosphates,  

silicones, and sulfur ................................................................................Does not contain 

Advantages 

• Operator-friendly product, as it is virtually odorless and very mild on the skin. 
• Excellent dimensional control and part quality thanks to the product's state-of-the-art technology. 
• Low consumption, reducing both operating costs and chemical requirements compared to petroleum-derived oil products. 
• Extended fluid life in both centralized systems and individual sumps, reducing waste volume and environmental impact. 
• Exceptionally clean parts and machine tools, often eliminating the need for subsequent cleaning processes with aggressive chemicals. 
• Clean milling cutters and perfect machining thanks to the product's excellent detergent power.
• Low foaming in both soft and hard water.
• Complete rejection of residual oil, allowing for safe management of oil waste.
• Formaldehyde-free; complies with all environmental standards and improves workplace safety and health conditions for operators. 
• Protection of parts and machine tools against bimetallic corrosion.